1987-1993 – With Hood Latch – ABS Core Support Beauty Cover Kit
- – Designed for 1987-1993 Mustangs with Factory Hood Latch and Hood Adjusters.
- – Enhances the look of your 1987-1993 Mustang engine bay
- – Quick-release design – secured with just 4 fasteners for easy removal
- – Precision-formed from durable ASA/ABS plastic for strength and heat resistance
- – Available in smooth or textured finishes to match your style
- – Low-profile design maintains a clean, OE-like appearance
- – Comes with our Aluminum Radiator Hold-Down Bracket with Insulators
- – Designed, tooled, and manufactured in Michigan, USA
- WHAT’S INCLUDED
- (1) ABS Core Support Beauty Cover (smooth or textured)
- (1) Aluminum Radiator Bracket with Insulators
- (2) Hood Adjuster Grommets
- (2) Slim Upper Aluminum Fascia Brackets
- (2) Radiator Bracket Hold-Down Stainless Steel Screws
- (2) Radiator Bracket Hold-Down Aluminum Washers
- (6) Low Profile Airbag Sensor Bolts
- (4) Low Profile Upper Fascia Bracket Bolts
- (2) Side Fascia Screws
- (1) Installation instructions.
- FITMENT NOTES:
- – Fits 1987-1993 Mustang
- – Hydraulic Hood Struts must be used in place of factory prop rod.
- – Headlight Grounds on top of core support must be relocated.
- – Will Not Fit Factory Style Radiators with Center Support Rods
- – May not work with aftermarket hood latches. Some trimming may be required.
By ordering, you agree to Makers Garage’s Presale Terms of Service and Privacy Policy. Your card will be charged immediately for the product cost and shipping costs.
In-stock Items ship within two to three business days of Purchase.
Backordered Items take, on average, 3-4 weeks to be shipped from the time of purchase.
Notice: Orders shipped to Canada are subjected to import fees.
Out of stock
Email when back in stock.
Description
Beauty Cover
- – Enhances the look of your 1987-1993 Mustang engine bay
- – Quick-release design – secured with just 4 fasteners for easy removal
- – Precision-formed from durable ASA/ABS plastic for strength and heat resistance
- – Available in smooth or textured finishes to match your style
- – Low-profile design maintains a clean, OE-like appearance
- – Designed, tooled, and manufactured in Michigan, USA
Radiator Bracket
- – Built from 5052 Aluminum
- – Welded In Reinforcement Bar
- – Satin Black Powder Coated Finish
- – Integrated Insulators (Pre-Installed and Replaceable) – Securely Holds Radiator
- – Includes Stainless Steel Fasteners with Black Anodized Aluminum Washers
- – Precision CNC-Cut
- – Designed for Aftermarket Radiators
- – Low-Profile Design
- – No Drilling or Modifications Required
- – Made in Pennsylvania, USA
Additional information
| Weight | 6 lbs |
|---|---|
| Dimensions | 64 × 12 × 6 in |
| Surface Finish | Textured, Smooth |
Related products
Makers GT40 Roadster Prototype Livery - Photo paper poster
Price range: $20.00 through $30.00
Large organic tote bag
$25.00
Makers Logo Mug
Price range: $12.00 through $15.00
RedLX-MountainClimb - Photo paper poster
Price range: $20.00 through $30.00
Makers GT.Cobra Splitter Sketch - Photo paper poster
Price range: $20.00 through $30.00
Makers 93 Cobra Hill Climb - Photo paper poster
Price range: $20.00 through $30.00- Reviews
- Questions
USGood concept, needs a little refinement
In the end, the finished product looks good. The clearance for the J-Hook was not sufficient and the pre-cut relief was not clean. Had to open up the area around the j-hook and then hand sand the cutout. The radiator bracket was missing the rubber isolators. The instructions were pretty but missed key details, especially when jumping back and forth between the radiator mount and the core support cover.
USDisappointed
Very disappointed with this product and experience! I initially ordered this kit on 11/8/25. I didn't receive any notice that it was being shipped untill 11/13/25, but it was just a notification that a label had been made. I kept checking the tracking number for a few days, but it just kept saying that the package had not yet been given to UPS, so I tried calling Maker's multiple times, but no one answered. Their phone message says that they can be reached by text, but again no one responded to that either. Finally I emailed them, and Jason did get back to me. He said he would get the item shipped, and I finally received the package on 11/21/25. However once I opened the package, I found that the aluminum radiator hold down that was supposed to be included was missing. At this point I just asked them to refund me the difference between the package I ordered, and the one that I actually received, of which they agreed to, and refunded me quickly. I fabricated my own radiator hold down to fit below the plastic beauty panel, and I finally had the chance to install the beauty panel today, and it did not fit well at all. The overall piece was too wide, and I had to use a heat gun to get the driver side of the panel to lay down better, along with having to do some sanding and trimming. I also had to do a lot of trimming around the headlights to get it to lay properly, and then none of the holes for the radiator hold down, or the hood bumpers were properly located. I had to ream out these holes to get them to work, and the split washers that go around the hood bumpers, just barely cover the holes because they are so misaligned. Then additionally, the hardware package was missing the two Allen bolts and washers for the radiator hold down locations, so I had to use different bolts that don't look as nice, but they work. Long story short, shipping didn't go the way it should have, communication could have been better, the package was missing parts and hardware, and the fitment required a lot of work to get it to fit even half decent on the car. This is by no means an inexpensive piece, so I would expect it to come with everything it's supposed to, and actually fit without needing major modification
USCore Support beauty cover
Everything was awesome fit and look was awesome , another great product from Makers Garage …..